MiniRobotLanguage (MRL)
ANA.HFlip
Flip an Image-Register (IR) horizontally
Intention
This command will flip the Content of IR 1 horizontally..
1. Just Flip IR P1 horizontally
This simple Script shows the Use of ANA.HFlip.
ANA.New|0|800|400
ANA.hgradient|0|&HFF0000|&H1000F4
ANA.Show|0!
' Make Resolution from P2 to the resolution from P1.
ANA.HFlip|0
DMP.6
ANA.Show|0!
ENR.
2. Flip P1 to P2
In this case, P1 will be H-Flipped to P2.
ANA.New|0|800|400
ANA.hgradient|0|&HFF0000|&H1000F4
ANA.Show|0!
' Make Resolution from P2 to the resolution from P1.
ANA.HFlip|0|1
DMP.6
ANA.Show|1!
ENR.
Effect of HFlip:
Syntax
ANA.HFlip|P1][|P2]
Parameter Explanation
P1 - Image-Register number, this IR contains the Image that is to be H-Flipped.
P2 - opt. Destination Image-Register number, if omitted, P1 will be used as Destination.
The Command will leave a 0/1 on the TOS. As always, a 0 means Error, while a 1 means "all fine".
Example
'***********************************
' ANA.HFlip-Sample
'***********************************
ANA.New|0|800|400
ANA.hgradient|0|&HFF0000|&H1000F4
ANA.Show|0!
' Make Resolution from P2 to the resolution from P1.
ANA.HFlip|0
DMP.6
ANA.Show|0!
ENR.
Remarks
-
Limitations:
-
See also:
•