MiniRobotLanguage (MRL)
ANA.Swap
Swap Image Register (IR) with another Image-Register (IR)
Intention
This command will exchange the Content of an Image Register with another Image Register.
The destination Image Register can not be empty.
In case there is another picture in the destination IR, this will be overwritten.
STW.ct|#32770|Basic-NAV Matrix 02
' We snap into the IR 2 here
ANA.Swap|2
' Swap IR 2 into IR 1 and IR 1 into IR 2
ANA.Swap|2|1
' Display IR 1
ANA.Show|1!
ENR.
Syntax
ANA.Swap|P1|P2
Parameter Explanation
P1 - Source Image-Register Number
P2 - Dest Image-Register Number
The Command will leave a 0/1 on the TOS. As always, a 0 means Error, while a 1 means "all fine".
Example
'***********************************
' ANA.Swap-Sample
'***********************************
STW.Act|FORM_DESKTOPS_MANAGER_FRMMAIN_CLASS:0|Desktops-Manager
ANA.Snap|0
ANA.BlockTo|0|1|40
' See the Content before the Swap
ANA.show|0!
ANA.show|1!
ANA.Swap|0|1
' See the Content after the Swap
ANA.show|0!
ANA.show|1!
ENR.
' Below you can see a part of the result of the "BlockTo"Operation.
' We used it here to have a content that can be swapped.
Remarks
-
Limitations:
-
See also:
•